Ways to sew on badges manually or by machine

If you would like to liven up a garment, accessory, luggage piece or perhaps hats you can actually sew on badges to obtain the new look easily. Badges or patches when placed strategically can immediately alter the look of a garment or accessory and take it from boring to spunky in a matter of minutes. In case you have children and they keep earning badges of merit you wish to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy once you know how you can get it done.

To do this procedure for sewing on a badge, start with placing the badge in the place for which you desire it. Now secure the badge well with some pins so it stays in place and doesn’t shift when you’re sewing it on. So if you happen to be putting the patch on a garment, you ought to fix the patch and after that try the garment on to make certain that the patch or the badge looks most suitable in the place. In case your patch requires a little readjustment you can do it at this stage easily.

Now thread the needle making sure that the thread you are using isn’t very long. Keep your thread within a length of approximately 18inches for quick maneuvering. If your thread is just too long then you might get bothered by knots. Once you have the thread ready create a knot at the end of the thread. You can thread a needle yourself by holding the non knotted end in between your forefinger and thumb and then passing it in the eye of the needle. You may as well get the aid of a needle threader if you find threading a needle like this difficult.

Pass the needle through the badge as well as the fabric ensuring that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from which you started stitching keeping this distance from your last stitch constantly. Continue stitching around the entire perimeter of the badge until you have completed stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread through a single stitch. Pull the thread strongly to secure the knot after which cut-off any excess thread that is left. Lastly remove extra safety pins that you were using to secure the patch in place.

It’s also possible to sew on badges through the help of a sewing machine if you don’t wish to do the same by hand. Pick a thread that matched the hue of the patch after which you can tread your machine. You can also select a contrasting color depending on the look that you would like to present your badge. Once this is done you have to start sewing you badge. Makes use of the top of the badge for your starting position and sew all along the edge of your badge using the regular stitch mode ending in your kick off point. Once done, cut the excess thread that connects the badge to the machine and your garment is ready to be used together with the badge.