When you want to liven up an outfit, accessory, luggage piece or even hats you can sew on badges to obtain the new look easily Http://trainingcollar.com
. Badges or patches when placed strategically can immediately change the look of a garment or accessory and take it from boring to spunky in a matter of minutes. Should you have children and they keep earning badges of merit you would like to sew them on. However, as intimidating as it might sound, sewing on badges is quite easy once you know how you can do it.
To do this procedure for sewing on a badge, start with placing the badge in the place in which you want it to be. Now secure the badge well with a few pins to ensure that it stays in place and doesn’t shift while you’re sewing it on. So if you happen to be putting the patch over a garment, you need to fix the patch and then try the garment on to be certain that the patch or the badge looks suitable in the place. If the patch needs a little readjustment you can do it at this point easily.
Now thread the needle making sure that the thread that you’re using isn’t very long. Maintain the thread within a length of approximately 18inches for simple maneuvering. In case your thread is just too long then you might get bothered by knots. Once you’ve the thread ready make a knot at the end of the thread. You can thread a needle yourself by holding the non knotted end between your forefinger and thumb and then passing it in the eye of your needle. You can also get the aid of a needle threader if you find threading a needle in this way difficult.
Pass the needle through the badge as well as the fabric making sure that the knot is on the wrong side of the patch. Leave a space of 1/8th of an inch from where you commenced stitching keeping this distance from the last stitch at all times. Continue stitching surrounding the entire perimeter of the badge till you have completely finished stitching it all the way through. Now knot the thread on the underside of the patch by looping your thread by way of a single stitch. Pull the thread securely to secure the knot after which you can cut off any excess thread that is left. Lastly take off the excess safety pins that you were using to secure the patch in position.
You can also sew on badges with the aid of a sewing machine if you don’t want to do the same by hand. Select a thread that matched the colour of the patch after which tread your machine. You may also pick out a contrasting color depending on the look that you like to provide your badge. Once this is achieved you should start sewing you badge. Take advantage of the surface of the badge for your kick off point and sew all across the edge of your badge making use of the regular stitch mode ending at your kick off point. Once done, cut any additional thread that connects the badge to the machine and your garment is ready for usage together with the badge.